How to Clean Garage Door

It can be difficult to find time to clean your garage door and maintain your home. Keeping your garage door looking great, however, is important for a number of reasons. Proper cleaning not only makes the surface of the door look good but it can prevent more serious structural issues from occurring. Additionally, curb appeal, warranty, and other things that you may not even consider can also provide tremendous benefits. Here are some things you can do to keep your garage door in the best shape possible.

What You’ll Need to Give It a Thorough Wash

Over time, your garage door will collect dirt, dust, and other debris. Giving it a proper wash with the right cleaning supplies is crucial for best results. Here’s what you’ll need to get the job done the right way.

Cleaning Solution

Even for an excellent clean, fancy soaps aren’t necessary. In fact, dishwasher soap or another mild detergent is usually perfect for the job. Once you get your hands on the soap, combine one cup of it with two gallons of warm water in a bucket for an ideal solution.

Non-Abrasive Sponges and Cloths

Your garage door can be sensitive to abrasive tools, so it’s imperative that you use a more gentle cleaning utensil like a soft sponge or bath cloth. You want to avoid accidentally scratching or damaging the door at all costs. You’ll also need some dry cloths to dry the door with after the cleaning process.

Step Ladder

Finally, you’ll need a step ladder so you can reach the highest parts of the door. Being at that height will also help you thoroughly inspect the job you’ve done before drying.

Get Scrubbing!

Once your supplies are in order, you’re ready to get to work. Although the scrubbing process is fairly self-explanatory, there are some things you should keep in mind to do the best job possible.

First, since you’re using a non-abrasive cleaning utensil, don’t be afraid to scrub the surface hard. If this is the first time you’re cleaning your garage door in several years, there’s probably a good amount of grime stuck on it. It’s worth taking some extra time and doing a good job.

You might encounter a spot with dirt that’s extremely caked on the door. When some extra elbow grease can’t get the job done, you can resort to a bleach and water mixture instead. For the optimal solution, mix one cup of bleach with one gallon of water. Bleach solutions should be used sparingly and carefully, as overdoing it can cause damage to the garage.

The weatherstripping and trim around the door are important to touch upon, too. In order for the door to look and function at its best, clean weatherstripping and trim are vital. Additionally, both the interior and exterior of the door should be scrubbed for the best results.

If you have a wood garage door, a thorough cleaning may result in minor erosions in your finish. If this happens, it may be necessary to give it a fresh coat of paint or stain to your existing finish or even refinish the door completely.

Things to Strictly Avoid While Washing Your Garage Door

You may be tempted to experiment with different methods of washing your garage door that is more convenient and take less time. While it’s great to think creatively, here are some practices that should be avoided.

Don’t Mix a Cleaning Solution With Bleach

As stated previously, bleach should be used solely for the toughest stains. When bleach mixes with your cleaning solution, either in the bucket or on the door itself, it can ruin the effectiveness of the solution and even diminish your door’s quality. The cleaning solution should be wiped off before bleach is applied. Furthermore, mixing bleach with other chemicals can be unsafe.

Pressure Washers Should Never Be Used

Even though grime could be stuck to the door, using a pressure washer to apply more power should never be considered. The integrity of your door should be of the utmost importance, and the process of washing it should never pose any risk of harming it. It is safe to use a hose with relatively gentle water pressure to wash off your garage door.

Don’t Call it a Day Until You’re Satisfied With the Result

When the cleaning process is complete, you should be happy with what you see. Making sure all parts of the garage door are clean, especially the bottom, is worth the necessary time. Also, take the time to use cloths to dry off the door to prevent water spots.

Waxing Your Garage Door

If your garage door is made of steel, it’s necessary to wax it as the last step in the cleaning process. A layer of wax to finish it off won’t only prevent wear and tear but will promote resistance to dirt and grime. If you live in an area that frequently experiences harsh weather, this is particularly important. You should aim to wax your steel garage door twice a year. It’s best to wax immediately after cleaning.

Only liquid waxes should be used on your door. A typical automotive wax is usually sufficient, and paste wax should never be applied. If you’re not sure how to properly apply wax, it’s worth doing some research before attempting to apply wax.

Restoring an Oxidized Garage Door

Oxidation of your garage door, which can make it rust, is caused by the build-up of dirt, salt, and moisture. Here’s how you can restore your door if oxidation has seized control.

Start by washing and drying the door by using the process described above. Dealing with oxidized parts of the door can only work when the door is free of grime and completely dried off.

Next, pour white vinegar into a spray bottle. Spray the rusted areas and use steel wool to scrub the area. Since steel wool is a somewhat abrasive cleaning utensil, be extra careful while scrubbing, making sure to only remove the rust without damaging the door.

You’ll now want to roughen the entire door with medium-grit sandpaper. This will prepare the door for a coat of primer.

Once the entire door is thoroughly sanded, paint it with a coat of primer that contains zinc chromate. This will help stop oxidation from happening in the future. A paint roller works well for flat parts of the door, but a paintbrush may be needed as well.

Finally, to ensure your door’s protection from future oxidation, you’ll want to apply a coat or two of rust-resistant paint. This will also help to hide the primer.

When your garage door needs cleaning, you can count on us at Garage Door Doctor to offer top-notch service in Indianapolis, IN, and the surrounding areas. We also offer garage door repair, garage door spring repair and replacement, and commercial garage door services. As members of the International Door Association, we offer 24/7 emergency services for whatever issues you may be dealing with. Being upfront with our customers about every aspect of what we do is at the heart of who we are. Give us a call today and we’ll give your garage door the makeover it’s been needing.

The post How to Clean Garage Door appeared first on Garage Door Doctor.

This post first appeared on https://www.garagedoordoctorllc.com

An energy-efficient garage helps reduce the burden on your house during extreme temperatures, as well as lowering your heating and cooling costs overall. By addressing the four questions listed below, you can rest assured that your garage door is conserving energy and helping reduce the energy consumption of your home.

Is Your Garage Weatherproof? 

One of the simplest ways to improve the energy efficiency of your home and garage is to install weather trim anywhere on your garage that is not airtight. Oftentimes, a garage door may not close completely throughout the length of the garage due to uneven flooring, a weather seal is a great solution to help create a barrier between the outside climate and your garage. A quality weather seal around all the entrances of the garage will make a big difference in energy efficiency.

Do You Have a Smart Garage Door Opener?

A smart opener allows you to more accurately manage the opening and closing of your garage. If you’re not sure if the garage door is closed or you need to open the door remotely, a smart opener gives you that flexibility. In most cases, you can set alarms to ensure your garage door is closed at night and during the highest temperatures of the summer. 

Is Your Garage Insulated? 

Another simple and effective way to improve the energy efficiency of your garage is to install insulation on your garage door and other areas of the garage. Garages may be unfinished or partially finished but can oftentimes not have insulation. The garage door itself may not be insulated as well. By adding insulation, you’re adding an extra layer of protection from the outside.

How Efficient is the Rest of Your Garage?

While your garage door is the largest entrance to your garage, other factors play a role in the energy efficiency of the space. Does your garage have windows? If so, how energy efficient are they? If the windows are older and do an insufficient job at managing temperature, replacing them may help reduce the overall temperature and increase efficiency. Do a thorough inspection of your entire garage for air leaks and other inefficiencies that may be leading to higher temperatures in your space. If you find any issues, repairing those or mitigating them will help increase the efficiency of your space.

The post Garage Door Blog first appeared on A Plus Garage Doors. This post first appeared on https://utahgaragedoors.net

If you have a garage door that will not close or is not closing all the way, many factors could be causing the issue. Sometimes, these factors are simple problems that you can swiftly and smoothly fix. Other times they are more complex issues that require intensive labor, repair parts and expert knowledge about garage door repair.

Misaligned Tracks

One of the most common reasons a garage door is not closing is because of misaligned tracks. The tracks are two rails that run parallel to each other and to the garage door. The garage door itself runs vertically up and down these tracks when opening and closing.If the tracks are not exactly parallel with each other, then your garage door will have issues properly closing.

The only way to fix this issue is to identify where the tracks are not parallel. Once it is determined why and where the tracks are no longer parallel, it will require restoring the tracks to the appropriate position. The tracks may be beyond restoration and could need replacing entirely.

Damaged Tracks

Similar to misaligned tracks, damaged tracks can also keep your garage door from closing. Track damage is typical with heavy-duty garage doors. Over time, the wear and tear from opening and closing heavy garage doors takes its toll on the tracks resulting in debilitating bends, blockages and warping of the rail.

Long-term use may result in physical obstructions whose removal allows the garage door to shut completely. Like with misaligned tracks, the only way to fix track damage is to identify where the track is faulty. Repairs may be possible, but depending on the extent of the damage, replacing the track may be the only option. Not addressing track damage will only worsen the situation and potentially become a danger to you and your loved ones.

Smudged Sensor

Garage door sensors are one of the most vital components of your garage door system. These sensors are small beam emitters, typically mounted close to the ground on either side of your garage door. These sensors shoot an invisible beam of light across the opening of your garage door. A dirty sensor may be keeping your garage door from closing. When something disrupts the light beam from these sensors, they send a signal to the receiver that prevents the garage door from closing.

Take a rag or cloth and wipe off any dust or particulate buildup on the lens of your sensors. Once both lenses are completely clear of debris, your garage door should close. If it is not closing, the safety in the sensor may be faulty, or it could be an issue with another component of your garage door system, in which case our team can help find an appropriate solution.

Malfunctioning Safety Sensor

After clearing your sensor lenses of dirt and your garage door is still not closing, the issue may be that your sensors have stopped receiving power. Usually, there is a green light on both sensors that indicate they are receiving power. If the light is off on both sensors, then they are not fully powered. Loss of electricity may happen if a power cable gets unplugged, a fuse blows, or a power outage occurs.

If the sensors are fully powered, then they may be misaligned. The misaligned sensors will not display a green light, similar to a power loss. If the light is not green, readjust the sensors until they are perfectly aligned and the light turns green.

Depleted Remote Control Battery

If your garage door is not closing, the issue may be with your garage door remote control. If your garage door is not responding to your remote control, try your wall switch or control panel. If your garage door closes when you use the wall switch, the issue is most likely a dead battery in your garage door remote. Replace the dead battery with a fresh one and try your remote again. If the problem persists, but you can still close your garage door with your wall switch, then your garage door opener may need to be reprogrammed or replaced entirely.

Faulty Garage Door Remotes

Garage door openers have a relatively small effective range. After replacing your remote battery with a fresh one and syncing it with your system, make sure you are using it within a distance that should work. If you are in the appropriate range of the system and it is still not closing, the issue may be the antenna on the receiver. The antenna is on the opener itself. Make sure your opener is clear of debris and anything else that may impede the signal. If you find that the signal range of your remote is lacking, use an extension kit to boost the effective range of your remote.

If you are on the same frequency as the opener of a neighbor, then their receiver may be interrupting your signal. Alleviate this by altering the transmission frequency of your remote if you are having issues with your remote.

Adjusting Limit Switches

Invalid limit settings may be the reason your garage door is not closing. The limit switches determine how far your garage door needs to move to close or open entirely. Incorrect limit settings are the common cause of garage doors closing all the way but reopening or not closing completely.

Limit settings that are too high trigger a faulty reading and cause the door to reopen because the receiver believes the door has hit an obstacle. Adjusting these settings to the correct level could get your door to close all the way, but the adjustment process is tricky. Extreme adjustments may cause your garage door to crash down, causing damage. It’s highly recommended for your safety that this be performed by a trusted, experienced garage door technician.

Active Disconnect Switch

An activated disconnect switch may be keeping your garage door from closing. If your opener motor runs without the door closing, then your disconnect switch is probably enabled. The disconnect switch connects to the typically bright red emergency cord. The disconnect could have been pulled accidentally or not disabled after the last time in use.

Disabling your disconnect switch is a relatively simple process, but it must be done correctly; otherwise, it could be dangerous. Our technicians can safely manually lower your garage door to the down position to do this. Your garage door must be in the down position. If you leave your garage door open when deactivating the safety switch, your garage door may slam down. If your garage door is stuck open, contact us for assistance. Do not attempt to brute force the door down. Forcing the door shut could cause majorly expensive damage.

Once your garage door is in the down position, we can pull the emergency cord towards the door until the spring lever extends and slide the door manually until it attaches to the trolley. We can also use your garage door remote to automatically reattach your garage door to the trolley. When the door reattaches, you should hear an audible click, and your garage door will be moving along the tracks as usual.

Your Local Garage Door Experts

Garage Door Doctor is the most accomplished garage door installation and repair specialist in the Indianapolis and Bloomington metro areas. We have the experience, knowledge and skills to get your garage door back on track. Give us a call today or contact us online for all of your garage door service needs!

The post Why Won’t My Garage Door Close? appeared first on Garage Door Doctor.

This post first appeared on https://www.garagedoordoctorllc.com

Garage door installations need regular lubrication, and there’s a right and wrong way to go about it. Learn the ins and outs from a local garage door company.

This post first appeared on https://www.doorpower.com

You’ll need garage door repair, of course, but what kind? And how do you spot storm damage in the first place if it isn’t exactly obvious?

This post first appeared on https://www.doorpower.com

As a garage door repair and garage door installation company, we strive for your peace of mind. Is your garage door keeping your family safe?

This post first appeared on https://www.doorpower.com

• 

• 

If you’re like most Americans, your garage door is used quite often – every time you head out to work and when you return. Not to mention the kids coming in and out, trips to the mailbox, and more. With all of its use, garage doors and garage door openers need to be replaced every so often. The standard life of a garage door is between 15 and 20 years, so depending on the age of your door and any damage that may have occurred, it may be time to install a new garage door. 

Is There Critical Damage? 

One of the biggest reasons to replace your garage door is because of the significant damage that happened. The damage could be from a variety of factors including weather, a teenage driver, or something else. If your garage door was recently damaged, it is a good idea to assess the situation and see if it is minimal damage like needing new paint or if it is something more severe like the garage not being able to open or close properly. Some of the damage you may encounter is just cosmetic and could easily be repaired but if the structure of the door is in question, it may be time for a new garage door installation. 

Is it Getting the Job Done? 

Garage doors have a purpose, mainly protecting your home from intruders, keeping severe weather out, safeguarding belongings, and more. If your current garage door isn’t functioning properly and mitigating these risks, it may be time to look into a new garage door. A damaged or aging garage door can affect the temperature of your garage which can also disturb the climate inside your home leading to higher energy bills. If you’re thinking it is time for a new garage door, check to see if it is still efficiently mitigating these risks and if it’s not, it may be the right time for a new garage door installation. 

Are You Updating the Look of Your Home? 

Another reason to update the look of your garage door with a new installation is that you’ve drastically changed the look of your home and your garage door no longer fits the look. Garage doors play a big role in your curb appeal and the overall look of your home and it’s possible that a new garage door will help increase the value of your home and the curb appeal. In many states, a new garage door sees a 100% return on investment. A win-win for curb appeal and the overall value of your home. 

Upgrading your home with a new garage door doesn’t have to be an expensive and daunting task. Reach out to our qualified garage door experts to find out how much it will cost and the options available to you.

The post Blog first appeared on A Plus Garage Doors. This post first appeared on https://utahgaragedoors.net

Smart & Secure Garage Doors

Bring the Light into Your Garage

Curb Appeal that Stands Out

Are you ready for a new garage door? Not only will a new garage door and a smart garage door opener make you happy as you come home from work, but it is also great for the value of your house! Garage door replacements have a high return on investment for home improvement projects so you can rest assured that the money spent will be money kept in the value of your home. If you’re ready to buy a new garage door, visit Utah Garage Doors.

The post Blog first appeared on A Plus Garage Doors. This post first appeared on https://utahgaragedoors.net

A warm garage can offer an ideal environment for you to work on some projects during winter. However, a warm garage during summer may not be ideal. Without adequate air conditioning and ventilation, the interior of your garage could get up to 20 degrees hotter than the outside. In other words, your garage can become virtually uninhabitable as the weather gets hotter. However, this does not mean that you cannot work or relax in your garage during summer. Below is a rundown of some tips you can count on to keep your garage cool and comfortable even as the weather outside gets hotter.

Remove Incandescent Lights

A lot of homeowners don’t invest wisely when it comes to garage lighting. They just hang cheap incandescent lights and assume that the lighting is okay as long as they can see what they need to see. Unfortunately, incandescent lights can increase temperatures in the garage because most of their energy is released as heat instead of light. In addition to increasing the temperatures of your garage, incandescent lights can put your garage at the risk of catching fire. Besides, incandescent lights are more inefficient, meaning that they can significantly increase your energy bills. Therefore, to keep your garage cool, safe, and comfortable, replacing any incandescent light bulbs with LEDs can be a huge improvement.

Get the Garage Walls Insulated

Most homeowners avoid investing in garage insulation. This makes garages some of the least insulated or the most poorly insulated rooms in many homes. Unfortunately, this makes them vulnerable to temperature fluctuations. During winter, they can get extremely cold, and when summer comes, these rooms can get unbearably hot. If you typically spend a considerable amount of time in your garage, you need to ensure its walls are adequately insulated. Wall insulation will go a long way in keeping the temperatures of your garage comfortable throughout the years without spending too much on heating and air conditioning.

Get an Air Conditioner

This seems like the most obvious technique to keep your garage cool. However, air conditioners can be quite expensive, and therefore, you should consider investing in an air conditioner for your garage only if you are going to be spending a lot of time there. Some suitable air conditioners for a garage include ductless wall-mounted mini-splits and window air conditioners. If your garage does not have windows, you can go for a through-the-wall air conditioner. If you are afraid that having an air conditioner in your garage will significantly increase your energy bills, you can invest in smart AC controllers. A smart AC controller will help you manage the operation of your garage air conditioner from your smartphone, which will go a long way in helping you keep your garage cool at the minimum cost possible.

Try a Dehumidifier

If the air in your garage is too humid, it can make the temperature of your house feel hotter than it actually is. As such, you could experience a soggy and uncomfortable feeling, making you sweat profusely. If you have sensitive furniture, goods, or electrical equipment, the high levels of humidity can make them susceptible to getting damaged by rust, fungus, or even mildew. If you live in a highly humid area, it may make sense for you to invest in a dehumidifier. In addition to keeping your garage cool, a dehumidifier will go a long way in protecting your belongings against damages associated with excessively moist air.

Try a Swamp Cooler

If you live in a dry area where humidity is extremely low, an air conditioner or a dehumidifier may not be an ideal way of keeping your garage cool. This is because although these systems can be effective in cooling your garage, they also remove humidity from the air. But when humidity is too low, you do not want to reduce it further. This is why investing in a swamp cooler makes more sense for people living in relatively dry areas. A swamp cooler will rely on water to not only chill but also moisten the air in your garage. Compared to air conditioners, swamp coolers are inexpensive to buy and install, and they cost less to operate and maintain.

Try Fans

In some cases, keeping your garage cool can be made possible by simply investing in a fan. A fan will push the temperatures in your garage down in several ways. For instance, it will improve the circulation of air, making your garage ventilation system more efficient. A fan will also cause a strong airflow on your body, which will increase the rate of evaporation from your skin, and consequently, make you feel cool and comfortable. However, you need to remember that fans are only effective in moderately warm areas. Therefore, if your garage tends to get too hot during summer, it is imperative for you to know that a fan might not effectively manage to keep it cool.

Declutter your Garage

If you use your garage for storing a lot of tools, machines, and other things, they can take up a significant amount of space which can negatively affect the flow of air in your garage. When the flow of air is blocked, it will be harder to keep your garage cool. Reduced airflow in your garage can also encourage the buildup of hot air and eventually make your garage uninhabitable. Therefore, if your garage is housing things you no longer need, you should start thinking of how you can dispose of them. You can also invest in shelves, cabinets, and toolboxes to keep your garage more organized and minimize clutter.

Improve Ventilation

Improving your garage ventilation is another effective way of keeping your garage cool during summer. Since hot air naturally rises, installing roof vents will allow hot air to go out, leaving the temperatures of your garage relatively cooler and more comfortable. You can also improve your garage ventilation by installing garage door vents. When the temperatures outside are reasonably low, you can keep the vents open to allow cool air to get into your garage. Adequate ventilation can also ensure that the fumes from your vehicle and machines operated in your garage leave your garage quickly. If the existing vents are not effectively cooling your garage, you can go for an active ventilation system. Although they are quite pricey, active ventilation systems are more effective and efficient when it comes to keeping a room cool. This type of system can be installed on the walls or the roof of your garage.

The Bottom Line

As you can see, if you spend a significant amount of time in your garage, then you have to find a way of keeping it cool, particularly during summer. There are several things you can do to this end, as explained above. If you need a garage door expert to help you insulate your garage door or even install garage door vents, Garage Door Doctor LLC is an excellent garage door expert to consider. We are a renowned garage door company providing high-quality garage doors and garage door services in and around Indianapolis. Get in touch with us today for more information about our company and services!

The post How to Cool a Garage appeared first on Garage Door Doctor.

This post first appeared on https://www.garagedoordoctorllc.com

The right garage door installation, combined with prompt garage door repairs and care, can make a world of a difference to your belongings’ conditions.

This post first appeared on https://www.doorpower.com